Description
Measurement principle and mounting
The piezoelectric pressure sensor’s signal is electronically amplified to provide an output signal of 0…5 VDC. The sensor is mounted in a stainless steel housing, protection class IP64 when the connector is plugged in.
If required, the sensor is ready for connection in an Ammonit steel cabinet.
When mounted outside the central steel cabinet we recommend protective housing with pressure compensation.
In measurement operation, the sensor needs an extern supply of at least 9 VDC.
Details & Specifications
Make | Ammonit |
---|---|
Model | AB 60 |
General Specification | :- |
Weight (Mass) | 80 g |
Dimension | Length 72 mm, diameter 22 mm |
Outputs | Output voltage: 0 … 5 VDC |
Power Supply | 9 … 32 V |
Power Consumption | 5 mA |
Operating Environment | ⦿ Operating Pressure: 800 … 1100 hPa (mbar) (Altitude: ≤ 1400 m) ⦿ Temperature operation range: -40 … 85 °C ⦿ Humidity range: 0 … 98 %RH ⦿ Atmosphere: non-ionic, non-corrosive |
Accuracy | ⦿ Total accuracy (-10 … 60 °C): ±1 % FSO* (±3 hPa; FSO is 300 hPa) * FSO (Full Scale Output) describes the difference of the upper and the lower limit of the pressure range ⦿ Repeatability: ±0.1 % FSO* ⦿ Long Term Stability: ±0.1 % FSO* |
Housing | Stainless steel |
Protection Level | IP 64 – when connector is plugged in |