LPPYRA03… Series – Spectrally Flat Class C Pyranometers

( 0 Reviews )

Make: Delta ohm Model: LPPYRA03S

✅ It provide the best economical solution for measuring solar efficiency.

✅ Measurand : Solar Radiation.

✅ Sensor Type : Thermopile (ISO 9060:2018).

✅ Signal Output : Analog (mV).

✅ Supplied With : 4-pole connector and use the CPM12AA4... optional cables.

Ask for Quotation

The LPPYRA03 are pyranometers classified as Spectrally Flat Class C (Second Class) in accordance with ISO 9060:2018 and according to the WMO.

The pyranometers are available in different versions:

LPPYRA03 – passive
LPPYRA03AC – active with current 4..20 mA output
LPPYRA03ACS – double 4…20 mA current output and RS485 serial output with MODBUS-RTU protocol.
LPPYRA03AV – active with voltage 0..1 V, 0..5 V, 0..10 V output, to specify.
LPPYRA03S – with MODBUS RS485 output.
LPPYRA03S12 – with SDI-12 output.

Make	Delta ohm
Model	LPPYRA03S
General Specification	:-
Measuring Range	0 ÷ 2000 W/m2
Output	Depending on the model: – Analog in µV/Wm-2 – Analog 4÷20 mA – Analog 0÷1 V, 0÷5 V or 0÷10 V – Double ouput: Analog 4÷20 mA + Digital RS485 Modus-RTU – Digital RS485 Modbus-RTU – Digital SDI-12
Power Supply	10÷30 Vdc (4÷20 mA – 0÷1 V – 0÷5 V outputs) 15÷30 Vdc (0÷10 V output) 5÷30 Vdc (RS485 Modbus-RTU) 7÷30 Vdc (SDI-12)
Power Consumption	< 200 µA for SDI-12 version
Classification	Spectrally Flat Class C
Long-term Instability	<, ±1, %
Non-linearity	<, ±1.5, %
Operating Conditions	Temperature : -40 ÷ 80 °C Humidity : 0 ÷ 100 % RH
Sensitivity	5 ÷ 15 µV/Wm-2
Spectral Range	300 ÷ 2800 nm
Zero off-set a) 200W/m²	<, ±15, W/m2
Zero off-set b) 5K/hr	<, ±4, W/m2
Complete zero off-set c)	<, ±20, W/m2
Tilt Response	<, ±2, %
Spectral Error	<, ±2, %
Temperature Response	< 3 %
Response Time (95%)	< 20 s
Protection Level	IP 67